Tag Archives: stormwater

CA’s New Industrial Storm Water Discharge Permit is effective July 1, 2015

Are you aware of the changes to California’s Industrial Stormwater Discharge Permit? Are you prepared to submit electronically?

What are stormwater permits and why do I need to know?

The National Pollutant Discharge Elimination System (NPDES) permit program controls water pollution by regulating point sources that discharge pollutants into waters of the United States. Stormwater runoff is generated when precipitation from rain and snowmelt events flows over land or impervious surfaces and does not percolate into the ground. As the runoff flows over the land or impervious surfaces (paved streets, parking lots, and building rooftops), it accumulates debris, chemicals, sediment or other pollutants that could adversely affect water quality if the runoff is discharged untreated. Most stormwater discharges are considered point sources and require coverage under an NPDES permit. Click to learn more about the Stormwater program. Most states are authorized to implement the Stormwater NPDES permitting program. EPA remains the permitting authority in a few states, territories, and on most land in Indian Country.

CalEPA stormwater

Are you in California? Ready for the New Industrial Stormwater Permit?

In California, the CalEPA’s State Water Resources Board is the authority. The new Industrial General Permit (IGP) was adopted April 1, 2014 and is effective July 1, 2015. The IGP requires electronic applications and reporting. If you missed the
2015 Workshops for the New Industrial General Permit, we’ll be happy to discuss changes and the process with you, as well as perform the permitting for you. There are also resources available online such as the Summary of Significant Changes for the New Industrial General Permit.

NATIONALPOLLUTANTDISCHARGEELIMINATION SYSTEM (NPDES) GENERALPERMIT FOR STORMWATER DISCHARGES ASSOCIATED WITH INDUSTRIAL ACTIVITIES ORDER NPDES NO. CAS000001 ORDER 2014-0057-DWQ

 TAIT’s professional environmental consultants can provide one or all of the following services associated with this plan: 

  1. Preparation of the Notice of Intent (NOI) and Storm Water Pollution Prevention Plan (SWPPP) and Site Map for the new General Permit. Assist clients with the electronic upload of the required information into the State Water Resources Control Board (SWRCB) Storm Water Multiple Application and Report Tracking System (SMARTS).
  2. Perform and document monthly inspections of the facilities to visually observe the best management practices (BMPs) for each drainage area for:
    • Unauthorized non-storm water discharges (NSWDs)
    • Authorized NSWDs
    • Outdoor Industrial activities, BMPs, potential pollutant sources
  3. Perform Qualifying Storm Event (QSE sampling):
    • 2 sampling events within first half of reporting year
    • 2 sampling events within second half of reporting year
    • Upload of sampling data into SMARTS database
  4. Prepare annual reports of facility activities, inspections, and sampling for the calendar year ending on July 1 of each year.  Upload of reports into the SMARTS database.
  5. If your facility qualifies for a No Exposure Certification (NEC), TAIT can assist with the preparation and uploading of the initial Permit Registration Documents (PRDs) and annual recertification documents via SMARTS.

Reach out to us and ask any questions you have. The deadline is coming up quickly, and we are here to help 🙂

TCEQ _ Texas Commission on Environmental Quality

TCEQ Issues a New Phase II MS4

TCEQ Issues a New Phase II MS4

The TCEQ – Texas Commission on Environmental Quality‘s publication The Advocate – writing for and about small businesses and local governments affected by environmental regulations published this update:

TCEQ _ Texas Commission on Environmental Quality

The new TPDES general permit for Phase II (Small) Municipal Separate Storm Sewer Systems.  TXR040000 became effective December 13, 2013. Operators of small MS4s must apply for authorization under the new permit by June 11, 2014.

Municipalities and other entities such as counties, universities, and special districts may be regulated MS4 operators if their roads, streets, gutters, ditches, channels, drains, or other stormwater conveyances are located within an urbanized area (UA). Maps identifying the urbanized areas are listed by city and state at the United States Census Bureau website.

To obtain permit coverage, submit a new Notice of Intent, a $100 application fee, and a Stormwater Management Program before June 11, 2014. Existing authorizations will remain active until the new applications are approved.

MS4s serving a population of fewer than 1,000 within a UA may qualify for a waiver. Those applications must also be submitted before June 11, 2014. Provisional coverage begins 30 days after the TCEQ receives the application.

The reissued general permit, factsheet, Response to Comments, and a Frequently Asked Questions document are now available on the TCEQ website.

The revised NOI Form No. 20368 and Waiver Form No. 20369 can be found on the TCEQ website. Forms from the previous permit period are no longer valid and will not be processed.

Additional compliance resources are available at Assistance Tools for Stormwater Permitting

For help understanding the requirements or the permitting process, contact the Small Business & Local Government Assistance Section’s compliance hotline at 1-800-447-2827 or the Stormwater & Pretreatment Team at 512-239-4671 or by email.

Looking forward to PEI / NACS 2013!

TAIT eagerly anticipates attending this year’s PEI / NACS Show, which takes place from October 12 to 15, 2013 at the Georgia World Congress Center in Atlanta.

We will have a booth and will be meeting with current and prospective clients both from the environmental side of the house, Tait Environmental Services and from the architectural / civil side, Tait & Associates.

PEI / NACS is a great show we consistently attend, rated Top 10 again last year. Do you have plans to attend? Contact us now and let’s discuss how we can do business together, and perhaps plan a time to meet up while we are in Atlanta.

NACS has announced a series of new post-expo evening events such as:

  • NACS Show Kick-Off Party | Saturday, October 12 | 5:30 pm – 7:00 pm
    Held on Atlanta’s “Restaurant Row,” the kick-off party will have planned entertainment and all attendees are eligible for a “Golden Ticket,” where winners will receive a limo party, spending money and access to exclusive parties all week. Tickets for the event are included in full registrations.
  • NACS Show Tailgate Party Sunday | October 13 | 5:30 pm – 6:45 pm  Attendees can stop by the Hall C lobby of the Georgia World Congress Center to watch NFL games and highlights on flat-screen TVs, as well as participate in onsite games and activities. Registration is free for all attendees.
  • NACS Show 2014 Launch Party | Monday, October 14 | 5:30 pm – 6:45 pm The Launch Party is also in the Hall C lobby of the GA WCC and will feature bands and other entertainment. The event allows attendees to learn more about other industry events that can help grow their business in 2014 and beyond. Registration is free for all attendees.

Chip Conley will be speaking at NACS this year. Chip is a best-selling author and acclaimed motivational speaker. He founded Joie de Vivre, California’s largest independent hotel company and America’s second-largest boutique hotelier, with over 40 unique and award-winning hotels, restaurants and spas.

Join us this year at the PEI/NACS show. We had a great time last year and look forward to it every year. Contact us to learn more.

Improving Sewer and Stormwater Systems in Kansas

It is so great when an announcement or article I come across while researching is a positive one about moving forward with improving our environment. The constant struggle between the money it costs to do so, and the harm if we don’t, weighs on most businesses and municipalities. Here is what I just read:

FOR IMMEDIATE RELEASE
March 22, 2013

Agreement Reached with the Unified Government of Wyandotte County and Kansas City, Kansas to Improve Sewer and Stormwater Systems

Settlement will ensure reductions in raw sewage overflows and stormwater flooding in the most impacted neighborhoods

WASHINGTON – The U.S. Environmental Protection Agency (EPA) and the U.S. Department of Justice announced that the Unified Government of Wyandotte Co. and Kansas City, Kan., has agreed to a settlement to address unauthorized overflows of untreated raw sewage and to reduce pollution levels in urban stormwater.

The settlement, lodged in federal court in Kansas City, Kan. requires the Unified Government to implement improved operation and maintenance programs for its sewer system, perform initial work to address sewer overflows, and implement an improved Storm Water Management Plan. The Unified Government will also develop a proposed overflow control plan for the sewer system by September 2016 for approval by EPA. Unified Government’s implementation of that plan, once approved, will be embodied in a subsequent judicial settlement.

“EPA is working with cities to find effective, affordable solutions to control raw sewage and stormwater overflows,” said Cynthia Giles, assistant administrator for EPA’s Office of Enforcement and Compliance Assurance. “The settlement allows the Unified Government to tackle their most important water quality problems first, while preparing a long-term approach to keep local waterways protected in the future.”

“This agreement will put the Unified Government of Wyandotte County on a clear path toward compliance with the Clean Water Act,” said Ignacia S. Moreno, assistant attorney general for the Justice Department’s Environment and Natural Resources Division. “The settlement will address deficiencies and require improvements to Wyandotte County’s sewer and stormwater systems that will reduce risks and bring cleaner water for the benefit of the county resident’s health and the environment.”

The Unified Government’s sewer system collects and receives domestic, commercial and industrial wastewater from approximately 110,000 area residents. The system includes five wastewater treatment plants and more than 800 miles of sewer lines. The system is served by about one-third combined sewers, which carry both stormwater and wastewater, and the remainder by separated sewers.

Since 2004, the Unified Government has reported more than 450 illegal sewer overflows from its sewer system. These overflows resulted in the discharge of raw sewage into the Missouri River, the Kansas River and their tributaries. Untreated sewage from overflows can cause serious water quality problems and health issues from pollutants including harmful bacteria, oxygen-depleting substances, suspended solids, toxic metals and chemicals, and nutrients. The overflows are in violation of the federal Clean Water Act and the terms of the city’s National Pollution Discharge Elimination System permits for operation of its sewer system.

Under the agreement, the Unified Government is required to perform initial work primarily in the combined sewer portion of the system, located in the oldest developed area of the city, which is expected to provide relief to residences and other properties in the urban core that are often affected by illegal sewer overflows.

The settlement also requires the Unified Government to implement an improved Storm Water Management Plan, designed to reduce pollutants in stormwater. Municipal stormwater sewers carry significant amounts of pollution into urban rivers, lakes, and streams. Pollutants such as lead, copper, oxygen-depleting materials and sediment in municipal stormwater can clog streams, harm or kill aquatic life, and result in human exposure to harmful substances. The existing stormwater management program at issue in this settlement was drafted by the Unified Government and made part of the stormwater discharge permit issued by the State of Kansas in 2001 and reissued in 2007.

Keeping raw sewage and contaminated stormwater out of the waters of the United States is one of the EPA’s highest priorities. Reductions in sewer and stormwater overflows are accomplished by obtaining cities’ commitments to implement timely, affordable solutions to these problems, which may also include the use of Integrated Municipal Stormwater and Wastewater Plans. Integrated plans are intended to be an option to help municipalities meet their CWA obligations by optimizing the benefits of their infrastructure improvement investments through the appropriate sequencing of work. This approach can also lead to more sustainable and comprehensive solutions, such as green infrastructure, that improve water quality and enhance community vitality.

The settlement, lodged in the U.S. District Court for the District of Kansas, is subject to a 30-day public comment period and approval by the federal court.

More information about the settlement: http://www.epa.gov/enforcement/water/cases/ugofkansascity.html

More information about EPA’s national enforcement initiative: http://www.epa.gov/compliance/data/planning/initiatives/2011sewagestormwater.html

More information about Integrated Municipal Stormwater and Wastewater Plans: http://cfpub.epa.gov/npdes/integratedplans.cfm

Minnesota’s Draft General Permit for Construction Stormwater Discharges

The Minnesota Pollution Control Agency (MPCA) is inviting stakeholders to comment on the draft Construction Stormwater General NPDES/SDS Permit up until March 20.

Comments, which must be writing, are due by 4:30 p.m. CT, March 20 to Lawrence Zdon, MPCA permit writer, at Lawrence.zdon@state.mn.us or 520 Lafayette Road N. St. Paul, MN 55155-4194.

Stakeholders will have an opportunity to ask questions about the draft permit at a public information meeting on March 8, beginning at 9 a.m., in the MPCA Citizens Board Room in the lower level of the agency’s St. Paul office.

$741,000 Clean Water Act Penalty

The EPA just Released: Homebuilder to Pay $741,000 Clean Water Act Penalty and Implement Company-Wide Stormwater Controls

This Settlement was enacted to prevent millions of pounds of sediment and polluted stormwater runoff from entering U.S. waterways each year.

Highlights from the above linked article: “[The affected company] will also invest in a company-wide stormwater compliance program to improve employee training and increase management oversight at all current and future residential construction sites across the nation. The company is required to inspect its current and future construction sites routinely to minimize stormwater runoff from sites. Polluted stormwater runoff and sediment from construction sites can flow directly into the nearest waterway, affecting drinking water quality and damaging valuable aquatic habitats.

Cynthia Giles, assistant administrator for EPA’s Office of Enforcement and Compliance and Assurance stated, “Today’s settlement will improve oversight of stormwater runoff at construction sites across the country and protect America’s waters.”

Ignacia S. Moreno, assistant attorney general for the Environment and Natural Resources Division of the Department of Justice said, “The settlement requires [them] to implement system-wide management controls and training that will help prevent polluted stormwater runoff from contaminating rivers, lakes and sources of drinking water.”

EPA estimates the settlement will prevent millions of pounds of sediment from entering U.S. waterways every year, including sediment that would otherwise enter the Chesapeake Bay, North America’s largest and most biologically diverse estuary. The bay and its tidal tributaries are threatened by pollution from a variety of sources and are overburdened with nitrogen, phosphorus and sediment that can be carried by stormwater.

The Clean Water Act requires permits for the discharge of stormwater runoff.

This settlement is the latest in a series of enforcement actions to address stormwater violations from residential construction sites around the country. More information about EPA’s stormwater enforcement can be found here.”

How will this settlement affect the industry? How may it affect your company? Often, a large settlement like this paid by one company will cause a ripple affect among other companies. Other manufacturing plants or construction companies may now be reconsidering their stormwater compliance programs. Do you know what your company’s training and inspection plan is?

Tait has certified stormwater practitioners and we can assist you with your stormwater needs. Contact us today!

 

TAIT SOQ – Stormwater & Water Quality Services

TAIT Statement of Qualifications

STORMWATER &WATER QUALITY SERVICES

Stormwater Pollution Prevention
Stormwater Detention & Erosion Control
Stormwater Quality & Erosion Control Certified Professionals
Spill Prevention Controls & Countermeasures
Post Construction Inspection & Maintenance
Environmental Management & Permitting
Employee Training
Civil Engineering
Land Surveying
Tait & Associates, Inc.
www.tait.com

Company Background

TAIT began as a consulting engineering firm dedicated to quality over 45 years ago, offering design and environmental services throughout the Western U.S. We practiced environmental management before environmental regulations were created. As regulations were created and revised, we immediately analyzed the impacts on our clients and took it as a chance to enhance our services; whether it was a new technical approach, a better management system, or simply improving our communication with clients, our end result improved service while strengthening our existing relationships with our clients.

Today, we are a full-service, multi-disciplined firm that offers a complete array of services in Land Development, National Development Programs, Environmental Services and Public Projects. More specifically, we offer civil engineering, surveying, architecture, planning, entitlements, environmental and construction related services. We offer a comprehensive, solutions-oriented approach which meets the needs or our clients who must comply with the environmental regulations.

With offices across the country, our network of professionals can work on your projects nationwide. TAIT is routinely recognized as an ENR Top 500 Design Firm and an ENR Top 200 Environmental Firm. We have specific expertise in stormwater and water quality services for both national and international clients. We understand the specific requirements of our clients and their related compliance needs and we provide unique solutions to complete projects on time and within budget. The bottom line is that few firms can match our combination of services, in-house talent and industry knowledge. Our expertise enables us to overcome our clients’ toughest challenges and has earned us a high level of repeat business.

Stormwater & Water Quality Services

TAIT has been designing and implementing stormwater and water quality pollution prevention plans and measures for decades. Since our founding in 1964, we have designed some of the most innovative and effective systems to monitor and protect stormwater.

TAIT has specialized in fuel storage and distribution systems since 1964. We have installed and performed hundreds of projects and programs throughout the United States for an extensive selection of facilities, including: commercial and retail service stations, distribution centers, utility switching stations, corporate maintenance yards and municipal and government fleet service facilities.

As part of our design of fuel systems, we pioneered environmental services before regulations were developed. We developed designs which incorporated spill protection and stormwater pollution protection as daily activities. We understand the stormwater protection and spill prevention go hand in hand. We also understand developing a plan or designing a treatment system alone is not sufficient. Inspections, training, monitoring and reporting are required and regulators are increasing their efforts to find those that are not following their plans. Our goal is to design a system that is easy to implement and, where necessary, assist you with the compliance record keeping, operation & maintenance, training and/or stormwater monitoring.

Regulations are Complex

Stormwater discharges are regulated by the U.S. Environmental Protection Agency (USEPA) under the National Pollutant Discharge Elimination System, which requires a Stormwater Pollution Prevention Plan be written and implemented depending on the facility’s industrial activity. However, each state and community may have its own specific requirements and regulations are changing all of the time.

TAIT is a proud member of the U.S. Green Building Council (USGBC). Recent advances, such as Leadership in Energy and Environmental Design (LEED) Green Building Rating System encourages and accelerates global adoption of sustainable green building and development practices, which includes the reuse, recycling and pollution prevention of stormwater as a major component of LEED Design. TAIT has several LEED Accredited Professionals dedicated to environmentally conscientious design.

Additional regulations such as the Spill Prevention, Control and Countermeasures (SPCC) rule, requires facilities to prepare, amend and implement SPCC Plans to prevent, prepare for, and respond to oil discharges. TAIT understands the regulations and monitors each state for changes in its stormwater spill prevention regulations.

Compliance is a Must

Stormwater protection plans and spill prevention procedures are required but operation & maintenance can’t be forgotten. Regulators will visit and when they do, they’ll be looking for the documentation that O&M, inspections and required monitoring are being performed. The fines for non-compliance are expensive. Compliance doesn’t end with our design of the plan. We have developed an environmental compliance system (TECS Online) that can be customized to your needs so that the paperwork is available when it is needed.

Professionally Staffed, Geographically Diverse

Many of the tasks required to maintain compliance require trained people on a periodic basis (not full-time). Some of the tasks can be performed by on-site staff, as long as they have the proper training, but in some cases we perform the required O&M, inspections and monitoring tasks. We have the geographical presence to assist with the periodic tasks that require a trained person.

In our offices we have Professional Civil Engineers, Erosion Control Engineers, stormwater sampling personnel, and LEED AP staff to assist with the design and development of plans and treatment systems, but also the day-to-day inspections and monitoring tasks to maintain compliance. We also have Certified Professionals in Stormwater Quality and Certified Professionals in Erosion and Sediment Control.

We are also experts in training and we customize training programs that ensure your associates are properly trained.

We have offices and professional staff located all across Western and Central U.S. ready to assist with your compliance needs at a moments notice with certified and trained staff where you need it. We are continually growing to meet your needs. For remote locations, we will subcontract with qualified local firms to assist us with the inspection and O&M requirements at those sites. We offer one-stop service for your stormwater and water quality compliance needs.

Fiscally Sound, Fully Insured

TAIT has a track record of success that spans over four decades. TAIT has stood on a solid financial footing since 1964 and currently maintains a complete business insurance portfolio to protect its clients:

  • General Liability – $10 million
  • Professional Liability – $5 million
  • Automobile Liability – $5 million
  • Workers’ Compensation – Statutory

Stormwater & Water Quality Services

We have the personnel able to work on all compliance needs related to stormwater quality, detention design, erosion control, spill prevention, operation and maintenance, employee training, and monitoring and compliance. Below is a description of our capabilities.

Permitting and Compliance

Each state regulates stormwater differently. We have the staff and experience to understand the site-specific permitting and notification requirements. We subscribe to stormwater periodicals and regulatory updates to ensure that we are aware of all regulatory changes that affect our clients. We are professionally registered in nearly all of the 50 states and across a multitude of disciplines.

Stormwater Pollution Prevention Plans

TAIT understands that the preparation of a construction and industrial stormwater pollution prevention plan (SWPPP) is a necessary component to assure compliance with the terms and conditions of the permitted construction activities. Site specific local regulatory agency will approve the SWPPP. TAIT personnel will prepare the site specific SWPPP with best management practices (BMPs) to minimize the potential for stormwater pollution that conforms to applicable agency oversight requested criteria for approval. Here is the link to review the EPA’s site for Stormwater Pollution Prevention Plans for Construction Activities. TAIT will prepare a SWPPP that includes procedures for conducting visual and analytical monitoring to determine the effectiveness of the BMPs. The SWPPP will also include a maintenance plan, employee training and required inspections.

Stormwater Detention & Treatment System Design

TAIT has the engineers and scientists with experience to design BMPs to treat affected stormwater runoff. We always attempt to utilize preventive measures to protect  stormwater quality such as good housekeeping procedures, exposure minimization, employee training, and spill control. However, in cases where additional measures are necessary, TAIT has the Professional Engineers and Certified Erosion Control Managers, to design, contain and/or treat contaminated stormwater prior to its discharge. We have over 45 years of experience in designing oil/water separators, detention ponds, vegetative drainage channels, collection and recycling systems to treat stormwater.

Water Quality Management Plans

The Water Quality Management Plan (WQMP) or the Standard Urban Stormwater Mitigation Plan (SUSMP) may be a necessary component for the initiation of your construction project. TAIT prepares and implements all aspects of the WQMP/SUSMP from local agency compliance correspondence to all site-specific scheduling, oversight, training, and maintenance activities.

Erosion Control Plans

Sediment in storm water discharges from sites is a major concern, especially during construction. An effective Erosion Control Plan compliments a Storm Water Pollution Prevention Plan (SWPPP) in providing a plan and methods to prevent sediment from leaving your site. Most jurisdictions require an erosion control plan for any construction activities during the rainy season. TAIT was preparing Erosion Control Plans long before NPDES was introduced and continues to prepare more than 40 a year. An effective Erosion Control Plan that has been coordinated with the construction sequence provides a clear method for the contractor to set up erosion and sediment protections and assists in the compliance with storm water requirements. Most erosion control plans require a yearly update if construction is on going. TAIT has provided site inspections and updated Erosion Control plans to adapt to the changing nature of the construction on projects lasting more than a year. Our engineers have the experience to prepare plans that provide effective erosion and sediment protection measures. TAIT also has Certified Professionals in Erosion and Sediment Control (CPESC) on its staff to assist on complex sites.

Spill Prevention Controls & Countermeasure Plans

Spill prevention is a major component to preventing the impact to stormwater, but at facilities that store more than 1,320-gal of oil or oil-related compounds, a spill prevention, containment and countermeasures (SPCC) plan must be developed and implemented. Again, TAIT has the experience and Professional Engineers needed to write an effective SPCC Plan, which conforms to the Environmental Protection Agency (EPA) guidelines and in compliance with Title 40 Code of Federal Regulations (CFR), Part 112.

Inspections & Monitoring

The creation of our plan, whether it’s a SWPPP, WQMP, O&M or SPCC Plan, is a sound start. Inspections and on-site, site-specific training must be conducted by qualified personnel to ensure that the stormwater and water quality management plans are effective and to take corrective action if they are not. Our intent when we deliver the plan is to assist our clients with the required inspections and monitoring that are specified. We have found that on-site associates may lack the experience or be too busy with their existing day-to-day activities to focus on the required inspections. We will work with you to develop a fail-safe plan to make sure the inspections and monitoring are performed when they are needed, no matter how remote the facility.

Operation & Maintenance

Proper O&M of on-site stormwater BMPs must be well documented when regulators arrive for an inspection. TAIT has the people, equipment and experience to assist your staff with O&M implementation. We design stormwater treatment equipment of all types; we know what is required and how often. We have staff with fully equipped trucks that can assist you with performing the required O&M of the treatment equipment.

Record Keeping

TAIT has developed a web-based, proprietary online Internet compliance database record keeping system that we call TECS Online. TECS is an acronym for TAIT Environmental Compliance System. We use it every day to record and document all kinds of inspections. Using a secure identification and password, we also have clients which log into TECS Online to perform their own inspections. It is fully customizable and allows anyone with a computer to monitor that inspections are being performed and review the inspections as soon as they are complete. TECS Online allows our clients the peace of mind that the inspections have occurred and that they can access the inspections at a moment’s notice.

The database provides direct and immediate access to archived historical records, via a user-friendly menu. Authorized representatives can review inspection records from previous events, and see future scheduled compliance inspections and certifications. Permits, documents, record drawings, site photographs, and reports can be accessed, and printed or forwarded, via email to facility personnel or regulatory agencies.

Employee Training

TAIT is a recognized expert in providing training to our clients. We recognized a need in California to develop environmental compliance training for hazmat operators. To date, we have trained well over 3,000. We have the ability to prepare site-specific, web-based or any other electronic media to conduct the training that is necessary for each site. We will customize the training to your facility and your stormwater compliance requirements.

Complete List of Company Services

Below is a list of services that we offer related to stormwater and water quality design, operation, management, and planning. In addition to water quality services, TAIT is a full-service engineering and environmental consulting company. We have also included a complete list of company services.

Stormwater and Water Quality Services

  • Oil/Water System, Stormwater Treatment System Design
  • Stormwater Detention / Retention Design
  • LEED-Certified Designs
  • SWPPP Preparation and Processing
  • Water Quality Management Plans (WQMP)
  • Erosion Control Plans/NPDES
  • SPCC Plan Preparation
  • Hydrology, Hydraulic and Drainage Studies
  • Reclaimed Water Systems and Pipelines
  • Floodplain Analysis
  • Water Quality Reports
  • On-Site Operation & Maintenance of BMPs
  • Storm Water Monitoring & Laboratory Analysis
  • Maintenance and repair of treatment systems
  • On-Site or Web-Based, Site-Specific Training
  • TECS-Online, Web-Based, Record Keeping System

Civil Engineering

  • Site Planning and Feasibility Analysis
  • Cost Estimating
  • Demolition Plans
  • Dimensional Control Plans
  • Grading and Drainage Plans
  • Utility Planning, Design and Coordination
  • Public Water System Design
  • Public Sanitary Sewer Design
  • Public Storm Drain Design
  • On-Site Striping and Signage Plans
  • Street Improvement Plans
  • Urban and Rural Highway Design
  • Emergency Fuel System Design
  • Specifications and Estimating
  • Construction Inspection

Surveying

  • A.L.T.A. / A.C.S.M. Surveys
  • Development Design Surveys
  • Topographic Surveys
  • Subdivision and Parcel Maps
  • Title Reviews
  • Boundary Control and Analysis
  • Record of Survey
  • Corner Records
  • Dedication Documents
  • Easements
  • Lot Line Adjustments/Consolidations
  • Monumentation
  • Construction Staking
  • As-built. Surveys

Planning and Permitting

  • Site Feasibility Assessment
  • Entitlement Research
  • Community Outreach
  • Design Review
  • Expedited Permit Processing
  • Project Presentation to Agencies
  • Third Party Plan Check
  • Construction Permit Expediting / Processing

Environmental Management

  • Phase I Environmental Site Assessments
  • Phase II Site Investigations
  • Site Assessment and Remediation
  • Soil Gas Surveys
  • Lead and Asbestos
  • Industrial Hygiene
  • Subsurface Investigations / Site Characterizations 
  • Soil and Groundwater Remediation
  • Monitoring and Sampling
  • Operations and Maintenance
  • Closure Reports
  • Environmental Oversight of Construction Activities
  • Hazardous Materials Abatement
  • Fuel System Inspection Services
  • Hazardous Materials Monitoring Installations, Repairs and Maintenance
  • Tank System Installation (Including Pre-Installation Testing)
  • Above and Below Ground Electrical
  • Tank System Upgrade (EVR, Secondary Containment, Etc.)
  • Tank and Pipe Repair and Replacement
  • Comprehensive Fuel System Compliance Services
  • Underground Storage Tank Removal Oversight
  • Hazardous Materials Area Plan Preparation
  • Hazardous Materials Business Plan (HMBP) Preparation
  • HazMAP (Online HMBP Submission & Emergency Response Tool)

Project Experience

We continue to exceed the heightened level of design standards for hospitals and medical facilities, knowing that our efficiency and effectiveness literally can make the difference in a successful project. We have provided civil engineering, land surveying, planning & permitting, as well as environmental management and compliance services for hospitals and medical facilities and have developed an expertise in this field.

We can submit to you, upon request, many of our projects over the past fifteen  years.

 

TRAINING COURSE FOR UST OPERATORS – California

New environmental regulations for Underground Storage Tank (UST) training were instituted on January 1, 2005 that required all underground storage operators in California to list a Designated Operator for their facility. Certified through the International Code Council (ICC), Designated Operators are critical in maintaining a facility’s environmental comliance, providing monthly visual inspections and annual training for facility employees. TAIT identified a need to create a training program that would help their clients satisfy the new requirement. This highly successful TAIT project has been ongoing since the Summer of 2004.

The new regulations impacted over 18,000 site owners throughout California. Additionally, many sites were owned and operated by individuals for whom English may be a second language. TAIT had to distill a complex regulatory code into a curriculum that could be assimilated by facility owners and operators. The team had to understand every nuance of the regulations and build a curriculum that could successfully pass that knowledge along to its students.

TAIT’s comprehensive curriculum includes presentations, practice exams, charts and study guides among its educational tools. To date, TAIT has trained well over 3,000 potential Designated Operators throughout California and has received tremendous positive feedback and words of gratitude from the clients they have served.

Tait now offers UST Operator Training courses for Alaska, ArizonaCaliforniaTexas, IllinoisColorado, Michigan, Ohio, North Carolina / Florida / VirginiaDC / ,  Nevada, Utah and other states.

ONLINE COMPLIANCE AUDIT & MANAGEMENT

TAIT performs individual on-site record inspections, compliance consulting and document management services for many companies across the US. TAIT uses TECS Online, a web-based compliance system, to expedite regulation and compliance information. TECS Online is an innovative and dynamic database system that serves as the core organizational tool to keep track of the ever changing environmental regulations and the compliance documents needed for agency approval. Through on-site visual inspections and record copying of all buildings each company identifies in the program, TAIT is able to keep current documents online, for the inspection and approval of our customers’ key personnel.

TAIT implemented their compliance management software TECS Online and made it available to various client asset managers to more effectively ensure environmental compliance. With this resource, their management personnel no longer needs to make regular site visits to create correct compliance records for their buildings. By having online access to the environmental compliance status of each of their sites, without doing the physical inspections, companies save time and money. TECS Online information records ensure the correct compliance records are in place for agency approval.

Would you like additional information about TAIT projects and services? Please email Melanie Nelson at mnelson@tait.com.